2300 Pinnacle Parkway Twinsburg, OH 44087
Phone: 330-963-5400
Fax: 330-425-3310

The MD-GAS-5C gas analyzer system is used to measure hydrocarbons (HC), parts per million as hexane (ppm); Carbon Monoxide (CO), percent; Carbon Dioxide (CO2), percent. Measurements for Oxygen (O2), percent; and Nitric Oxide (NOx), ppm can be added for analysis of five major gases contained in the vehicle exhaust stream. This system is a stand-alone package containing all components required for vehicle exhaust sampling. 

 


MD-GAS-5C Specifications

Measurement Technique:

CO:

CO2:

HC:

O2:

NOx:

NDIR

NDIR

NDIR

Electrochemical sensor

Electrochemical sensor

Exhaust Probe:

 

4.5 m (610 mm) flexible tube

Operating Conditions:

Temperature:

Humidity:

35° to 110° F (5° to 45° C)

5 to 95% RH (non condensing)

Ranges:

CO:

CO2:

HC:

 

 

 

O2:

NOx:

0 to 15%

0 to 20%

0 to 20,000 ppm (Hexane-std. res.)

0 to 40,000 ppm (Propane-std. res.)

0 to 3,276.7 ppm (Hexane-high res.)

0 to 3,276.7 ppm (Propane-high res.)

0 to 25%

0 to 5,000 ppm

CO Accuracy:

0.00 - 10.00%:

10.01 - 14.00%:

± 3% of point or 0.02% absolute

± 5% of point

CO2 Accuracy:

0.00 - 16.00%:

16.01 - 18.00%:

± 3% of point or 0.3% absolute

± 5% of point

HC Accuracy:

0 - 2,000 ppmh:

2,001 - 5,000 ppmh:

5,001 - 9,999 ppmh:

Above 10,000 ppmh:

± 3% of point or 4 ppmh absolute

± 5% of point

± 10% of point

> 10% of point

O2 Accuracy:

0 - 25.00%

± 5% of point or 0.1% absolute

NOx Accuracy:

0 - 4,000 ppm:

4,001 - 5,000 ppm

± 4% of point or 25 ppm

± 8% of point

Resolution:

CO:

CO2:

HC:

O2:

NOx:

0.01% (.001% high res.)

0.1% (.01% high res.)

1 ppm (.1 ppm high res.)

0.01%

1 ppm

Particle Filter:

 

99.9% removal of particles 0.5 microns or larger

Air Dryer (option):

Type:

Water Droplets / Oil Aerosols:

Solid Particles:

Refrigerated Water Condenser

 

5 ppm

3 microns or larger

Dimensions:

 

28" x 21" x 34"

• Specifications subject to change without notice.

 

 

Features:

  • Microprocessor controlled
  • Supports NOx for Loaded Mode Testing
  • Continuously draining water removal
  • Particle trap
  • Flow control
  • Air dryer (option)
  • Meets or exceeds accuracies for BAR 97, BAR 90, BAR/TAS 84, BAR 80, EPA 207B (U.S.) OIML Class I and AUII (Germany), OIML Class I (France), OIML Class I (Switzerland), OIML Class I (Netherlands), PTB-AUII (Germany)
Download MD-Gas-5C Manual
 

 

  Search the Site

  Options and Accessories


 

Above Ground Kits

4 Post Lift
Ramp Kits
Sensors
Engine RPM Module
Weather Station
Air / Fuel Analyzer
Pressure Sensors
EGT Sensors
Accessories
5 Gas Analyzer
Diesel Opacity Meter
Engine Cooling Fan
Throttle Actuator
More Options
Financing
Request a Quote
Why Choose Mustang?
 
      © 2005 Mustang Dynamometer