 |
|
Air/Fuel
Ratio Meter
Accurately
determines exhaust gas mixture over a wide range of engine
operating conditions with a fast response time. Seamlessly
integrates with your MD-7000 Controller and Data Acquisition
system for graphing AFR against power, torque and engine
rpm. MD#: MD-PLM
|
Air/Fuel
Ratio Meter
|
|
|
|
SmartTach
Engine
RPM Module
The SmartTach is a precision speed measurement instrument designed specifically for the development and testing environment. Among its many innovations is the capability to continuously measure speed form virtually any type of signal. MD#:
SmartTach
|
.jpg)
Engine
RPM Module
|
|
|
|
|
|
|
Integrated
Weather Station
Mustang's
Integrated Weather Station consists of the MD-HMW-71 Humidity
& Temperature Transmitter and the MD-PTB-100 Barometric
Pressure Transmitter by VAISALA. Measurements
from these two transmitters are used to correct power and torque
measurements to standard atmospheric conditions. MD#:
MD-IWS
|
Weather
Station
|
|
|
|
Pressure
Sensors
Designed to provide a highly stable
and accuracte measurement of fluid and/or gas pressures. Enables
you to graph various pressures against power, torque and/or engine
RPM curves. (-15 to 15-psi, 30-psi, 60-psi, 100-psi) MD#:
MD-PRS
|
Pressure
Sensors |
|
|
|
Exhaust
Gas Temperature Sensor
Developed
specifically for on track racing and dyno applications. Exposed
tip design provides quick response. Installs using weld type
compression fitting (included). MD#:
MD-EGT
|
Exhaust
Gas Temp. Sensor
|
|
|
|
Oil
Temperature Sensor
Accurately
measure and monitor engine oil temperature. Closely monitoring
engine oil temperature ensures your dyno runs are compareable and
helps increase repeatability. MD#:
MD-OTS
|
Oil
Temperature Sensor
|
|
|
|
Mainfold
Vacuum Sensor
Accurately
measure manifold vacuum pressure in normally aspirated engines.
Integrates with your MD-7000 Controller and Data Acquisition
System for graphing manifold pressure against power, torque and
engine RPM. MD#:
MD-MVS
|
Manifold
Vacuum Sensor
|
|
|
|
Vehicle
Pull-Down Kit
Mustang's
innovative vehicle pull-down kit is available as an option for
most Mustang Dyno models. The pull-down kit enables you to apply
additional downward force and helps ensure proper
tire-to-roll interface during testing, greatly reducing the likelihood
of breaking traction. MD#:
MD-PDK
|
Vehicle
Pull-Down Kit
|
|
|
|
Engine
Cooling Fan
When
positioned in front of vehicle radiator the MD-ECF Engine Cooling
Fan generates air flow of 5,500 CFM for engine cooling purposes.
20" from ground to center of fan. Options include automatic
fan controller and adjustable fan height. MD#:
MD-ECF
|
Engine
Cooling Fan
|
|
|
|
Integrated
5 Gas Analyzer
Accurately
measures 5 major gases contained in vehicle exhaust stream.
Seamlessly integrates with your MD-7000 Controller and Data
Acquisition system for graphing each gas against power, torque and
engine RPM. Microprocessor controlled. Meets or exceeds accuracies
for BAR 97. MD#: MD-GAS-5C
|
Integrated
5 Gas Analyzer
|
|
|
|
Diesel
Opacity Smoke Meter
Designed
to measure particle content of a diesel engine exhaust. The
analyzer is interfaced to the computer via RS-232 allowing
automated testing and accurate smoke opacity analysis. The diesel
opacity meter is designed as a reliable portable meter for light
and heavy-duty diesel vehicles. MD#:
MD-SMK-DT
|
Diesel
Opacity Smoke Meter
|
|
|
|
Above
Ground 4-Post Lift
Mustang's
4-post
lift option comes complete with stairs, platforms, swing-out rear
restraint arms and a heavy duty railing system for added safety.
Shops with
space to accommodate the four-post lift option can enjoy the advantages
and extra utility that this installation offers.
MD#:
MD-LIFT
|
4-Post
Lift Option
|
|
|
|
|
|